Release notes InstalSystem 5
| Product | InstalSystem 5 |
| Type of article | PRODUCT INFORMATION |
| Source for translation | IS 5.0 Beta Rev. 2.0.B2 |
Informação sobre alterações
Versão BETA Rev. 2.0.B2
Módulos:
Módulo base
- Correção das paredes geradas automaticamente pelo Gerador de divisórias.
- Correção dos fragmentos de ligação da subcamada no formato .pdf.
- Padronizada a lista de tipos de divisões.
- Permitida mudança rápida entre folha de trabalho no editor gráfico ao usar as setas próximas à janela de seleção das folhas de trabalho.
Aquecimento radiante - sistemas de circuito
- Deslocação da janela das definições do circuito de controlo para Fontes em Sistemas térmicos em Dados gerais.
- Permissão para substituir fontes de temperatura virtual com elementos gráficos ao carregar em botão especial das definições de circuito de controlo em Dados gerais.
Versão BETA Rev. 2.0.B1
Módulos:
Módulo base
- Introdução da habilidade de pesquisar elementos no Explorador de projeto baseado numa série de sinais.
- Permissão de introdução de mansardas.
Artigos em HelpSystem:
- Projetar sistemas de aquecimento com radiadores convectivos
- Projetar instalação de aquecimento radiante com base nos dados da aplicação Smart
- Zona de aquecimento/arrefecimento
- Usar catálogos e dados dos catálogos no projeto
Versão BETA 37 Rev. 0.0.B37
Módulos:
Módulo base
- Melhorada a eficiência do programa em processar projetos complexos, tempo de carregamento de ficheiros e regeneração da vista 3D.
Dimensionamento de radiadores
- Adicionada a capacidade de pesquisar radiadores e válvulas posicionadas nos radiadores na janela de pesquisa de elementos no projeto.
Perda de calor (Carga térmica)
- Introduzido o módulo de perda de calor (carga térmics) de acordo com a norma EN 12831.
Artigos em HelpSystem:
- Preparação da estrutura do edifício (atualizado)
- Aplicação Smart - Seleção rápida dos componentes do sistema (atualizado)
Versão BETA 35 Rev. 0.0.B35
Módulos:
Módulo base
- Aumento da ergonomia da edição do teto ao fazer multi edição de alguns vértices ao mesmo tempo.
- Funções unir e cortar identificam os locais numa operação.
- Introduzidos novos elementos físicos - Janelas e portas curvas.
- Introduzido novo elemento físico - Abertura na laje.
- Melhorada a assitência da construção de instalações se tiver buraco no teto.
- Introduzida nova característica - Contorno do edifício.
- Introduzida a interpretação de paredes baseado no traçado do edifício.
- Introduzida uma nova característica - Gerador de divisórias.
Artigos em HelpSystem:
- Editar tubos de alimentação no sistema radiante (atualizado)
- Dados gerais
- Importar ficheiros (atualizado)
- Coletor e acessórios (atualizado)
- Preparação da estrutura do edifício
Versão BETA 34 Rev. 0.0.B34
Módulos:
Módulo base, incluíndo Gestor InstalSystem
- Melhorada a importação de ficheiros criados em InstalSystem 4 para a eliminação automática de elementos que não são suportados em InstalSystem 5.
- Melhorada a ligação Parede.
- Integrada a gama completa das operações de processamento de Construção.
Dimensionamento de radiador
- Expansão do dimensionamento de radiador em Adição para termostato e Adição para revestimento/canal.
- Expansão de operações nos elementos Radiadores sobre a possibilidade de Virar na horizontal.
Artigos em HelpSystem:
- Projetar instalação de aquecimento/arrefecimento radiante
- Projetar sistemas de painéis radiantes (teto, parede) de aquecimento/arrefecimento
- Projetar sistemas de aquecimento radiante com tubagens como sistema de distribuição
- Painéis de teto radiantes de aço
Versão BETA 33 Rev. 0.0.B33
Módulos:
Aquecimento radiante - sistemas de circuito
- Melhorada a propagação de dados dos elementos Divisão criados com paredes para os elementos Zona de Parede aquecida/arrefecida.
Dimensionamento de radiador
- Melhorada a propagação de dados dos elementos Divisão criados com paredes para os elementos Radiador
Versão BETA 32 Rev. 0.0.B32
Módulos:
Módulo base, incluindo Gestor InstalSystem
- Introduzida a capacidade de criar divisões de outros elementos de estrutura de edifício inserido no projeto.
- Introduzida a capacidade de dividir o telhado em partes e adicionar novas funcionalidades que permite alterar as ordenadas de pontos indivíduais no contorno do telhado para modelar a sua superfície real.
- Introduzido novo elemento físico - janela de telhado.
- Introduzido novo elemento físico - entalhe.
- Melhorada a avaliação da localização dos elementos acima do plano do pavimento.
- Melhorada a ergonomia do editor de etiquetas.
Dimensionamento de radiador
- Introduzido dimensionamento de radiador no âmbito básico. Esta funcionalidade estará completa e desenvolvida nas próximas versões beta.
Artigos em HelpSystem:
Versão BETA 31 Rev. 0.0.B31
Módulos:
Módulo base, incluíndo Gestor InstalSystem
- Introduzida nova conceção para elemento de parede e a funcionalidade de conetar paredes.
- Indroduzido novo elemento físico - a laje.
- Indroduzido novo elemento físico - o teto.
- Expandida função "Sombra de andar" para a possibilidade de declarar sombras exibidas para todos os andares abaixo.
Aquecimento radiante - sistemas de painel
- Introduzida a possibilidade de calcular a potência térmica dos painéis de teto/parede de acordo com a norma EN 1264.
Artigos em HelpSystem:
Version BETA 30 Rev. 0.0.B30
Modules:
Base module, including InstalSystem Manager
- Allowed to control the content of diagnostic messages using the checkbox "Messages for selected components" on the list of filters in the diagnostics window.
- Introduced the possibility to handle by the distribution system mail domains with the sign "-".
Radiant heating - panel systems
- Taken into account results for panels in the radiant heating general results.
- Introduced the presentation of panels connection points on 3D view.
Articles in HelpSystem:
- Editing pipe feeds in a radiant system (actualized)
- How to eliminate problems with the diagnostic message: "Automatic arrangement of pipe feeds not possible - change pipe feeds route or H/C Zone parameters or arrange pipe feeds manually"
- Smart application - Quick selection of system components
Version BETA 29 Rev. 16.5.1
Modules:
Base module, including InstalSystem Manager
- Allowed handling of mail domains containing sign "-" by the licence distribution system.
- Improved stability of the program during pasting complex installations.
- Introduced the ability to display the storeys shadow above and below on 2D view.
- For each element with snapping possibility added the ability to set in the AUTO mode a parameter which predetermine distance from the edge of another inserted element.
Radiant heating - loop systems
- Corrected a bug related to the manual connecting RHC loop directly to the manifold (without pipe-runs).
Radiant heating - panel systems
- Allowed the presentation of data in the printout of 'Manifold table' for panel systems installation.
Radiant heating - dry systems
- Introduced dry system to the neutral catalogue of radiant heating systems.
Articles in HelpSystem:
- Installation, activation and update InstalSystem 5 package
- Manifold and accessories
- Project and application management
Version BETA 28 Rev. 16.4.1
Modules:
Base module, including InstalSystem Manager
- Improved the automatic snapping of pipe-runs for the ORTO mode.
- Improved the function of rooms interpretation for files imported from InstalSystem 4 package.
- Introduced the ability to insert into the project construction elements: Wall, Window, Door, Opening in wall.
Radiant heating - panel systems
- Introduced the possibility to insert into the project element Ceiling false panel (panel with no connection).
- Added the cooling result card for panel installation: General results cooling.
- Included elements: Wall panel and Ceiling panel in results card: General results heating.
Version BETA 27 Rev. 16.3.1
Modules:
Base module, including InstalSystem Manager
- Improved function 'automatically connect terminal units'.
- Made available the ability to configure the buttons to select a group of elements (SHIFT and CTRL).
- Introduced possibility of selecting 'None' in the climatic data in case of lack of apropriate climatic data catalogue in the program.
- Added the function of the graphic presentation of the route of flow from a given receiver to the source.
- Added the function of the graphic presentation of routes flow from the source (manifold, source) to all receivers, which it supplies.
Radiant heating - dry systems
- Introduced handling underfloor panels which lead the pipes in dry systems of radiant heating.
Version BETA 26 Rev. 16.2.1
Modules:
Base module, including InstalSystem Manager
- Improved saving files in a network location.
- Introduced the possibility to choose the source for which you want to appear the critical circuit.
Version BETA 25 Rev. 16.1.1
Modules:
Base module, including InstalSystem Manager
- Added function that allows automatically connect terminal units.
- Added possibility of quick creating rectangular room with sides parallel to the X, Y by drawing diagonal of the room.
- The problem with sending Problem Report Form is eliminated.
Radiant heating - panel systems
- Added function that allows connect panels in series.
- Introduced the possibility to design heating/cooling installations using ceiling/wall panels (including radiant steel ceiling panels).
Attention! Required upgrade to the configuration with the new module (InstalSystem Manager - tab "Upgrade").
Articles in HelpSystem:
- Connecting storeys with the "Stack" element
- View navigation in the graphical editor
- Combine base files
Version BETA 24 Rev. 15.12.1
Warning! For this version of the program the reinstallation is necessary.
Modules:
Base module, including InstalSystem Manager
- Improved stability and quality of the program.
Radiant heating - loop systems
- Added a message about the lack of possibility for editing automatically generated pipe feeds/RHC loops.
- Standarized the content of data table for heating/cooling zones at various ranges of editing.
- Introduced permanent visibility of the field Pipe laying pattern in the data table for heating/cooling zones.
- Fixed an error that occurs while connecting pipe feeds route to the heating/cooling zone.
Articles in HelpSystem:
Version BETA 23 Rev. 15.11.1
Modules:
Base module, including InstalSystem Manager
- Fixed the problem with sending the Problem report form.
- Added icons for the .isproj files displayed in the InstalSystem Manager and in the Windows Explorer's window.
- The scope of the displayed catalogues in the general data has been adapted to the available project scope for the package.
Radiant heating - loop systems
- Changed the designation of nodes in the grid which supports the manual drawing of the loop.
- Added message box indicating the inability to remove the RHC loop.
Heating network with balancing
- Fixed the automatic sizing of manifolds' cabinets.
- Improved the propagation of the default data for manifold cabinet.
Articles in HelpSystem:
- Editing pipe feeds in a radiant system
- How to make the program run faster
- Installation with ceiling heating and cooling system in commercial building
- Search components in the project
Version BETA 22 Rev. 15.10.1
Modules:
Base module, including InstalSystem Manager
- Added graphical rulers (horizontal and vertical) to help verify the scale of loaded underlay.
- Improved ORTO and AUTO modes.
- Fixed the problem with sending error report form after crash of the program.
- Improved overall stability and quality of the program by eliminating the reported errors.
Articles in HelpSystem:
Version BETA 21 Rev. 15.9.2
Modules:
Base module, including InstalSystem Manager
- Modified the way of importing base drawing files.
- Added a Select components in rectangle function under the left mouse button.
- Improved acting of ORTO mode when moving objects.
- Accelerated loading of the newly created or saved again files, as a consequence the files created on previous versions may load slower.
Radiant heating - loop systems
- Added the possibility of parallel connection of several RHC loop to one common outlet from the manifold.
- Introduced balance diagnostics of the RHC loop connected to the manifold with not integrated balancing valves, and the possibility of adding on the pipe-runs valves which are balancing these objects.
Heating network with balancing
- Added the possibility to use multi-circuit heating floor zone.
- Introduced balance diagnostics of the circuits by the heating floor zones in the systems without the manifold.
- Added the possibility to supply multi-circuit heating floor zone from several manifolds.
- Introduced the possibility of supplying heating/cooling zones directly from the virtual or graphical source, without the usage of a manifold.
Articles in HelpSystem:
- Calculation of cooling capacity for radiant systems (floor, wall or ceiling)
- How to calculate a file using a package configuration other than the one under which the file was created
- Installation with underfloor and wall radiant heating system in single family building
Version BETA 16.1 Rev. 15.5.17
Modules:
Base module, including InstalSystem Manager
- Added new tool to search and select items in the project.
- Improved the import and export of bases.
- Introduced the control of print range which based on the edition range and the elements' styles.
- Introduced the possibility to highlight and select project's elements to which messages on the diagnostic list referred to.
- Added the possibility to highlight on the worksheet elements forming the circuit of specified receptor from this worksheet.
Radiant heating - loop systems
- Improved the functionality of pipe feed automatic generation.
Articles in HelpSystem:
Version BETA 15.1 Rev. 15.4.21
Initial scope of modules:
- Base module, including InstalSystem Manager
- Radiant heating - loop systems
- Cooling mode for radiant systems
- Heating network with balancing
- BIM Interface (gbXML)