Release notes InstalSystem 5

From HelpSystem
Revision as of 10:42, 14 December 2018 by Hsadmin (talk | contribs)

Jump to navigation Jump to search
Product InstalSystem 5
Type of article PRODUCT INFORMATION
Source for translation GOLD Rev. 13.2


Information about changes

RELEASE Rev. 13.2

  • There were no significant functional changes in this release.

RELEASE Rev. 13.1

Modules:

Base module

  • Rearrangement of icons in Construction

Radiant systems

  • Reconstruction and improvements of Interactive radiant systems calculations

RELEASE Rev. 13.0

Modules:

Base module

  • Headers of result tables can be locked and visible while scrolling tables.

Heat loss

  • Possibility to assign thermal partition definition (with defined U value) to construction partition of the same type, irrespective to its thickness.

Radiant systems

  • Pipe-feeds for underfloor heating/cooling system can be laid in insulation layer (below heating/cooling pipes in the screed)
  • Possibility to change orientation (vertically or horizontally) of the Mixer / Pump unit .
  • New label for element Mixer / Pump unit .
  • Mixer / control unit chart
  • Improvements of algorithm which determines supply temperature for radiant systems.
  • Improvements of algorithm which divides element Heating/Cooling Zone into Heating-cooling surface.
  • Diagnostics of laminar flow.

Heating systems and Cooling systems

  • More connection variants for element Terminal unit.

RELEASE Rev. 12.2

Modules:

InstalSystem Base module and Package Manager

  • Improvement of Autosave function

Cooling systems

  • Implemented cooling system module - availability depending on package

RELEASE Rev. 12.1

  • There were no significant functional changes in this release.

RELEASE Rev. 12.0

Modules:

InstalSystem Base module and Package Manager

  • Improvement of AUTO mode.
  • Diagnostics of available graphics cards.

Radiator sizing

  • Display of radiator output for manually selected sizes through the Data table.

Radiant panel systems

  • Improvement of readability of Manifold table.
  • Improvement of algorithm determining drop of temperature on the set of serially connected panels.

RELEASE Rev. 11.0

Modules:

InstalSystem basis and Package Manager

  • Improved function Automatic walls, slabs and roofs.
  • Improved zoom scale and the preview scale.
  • Improved diagnostics concerning errors in the building structure.
  • Supplemented information presented in the result tables.
  • Integration of Paper format element with Printout pages element.

Radiant loop systems

  • Improved algorithm of heat output calculations of Heated by pipe feeds floor type connected virtually.
  • Improved algorithm which automatically inserts a heating/cooling floors into rooms with a hole in the slab.

Heating systems

  • Improved automatic connections of integrated radiators to distrubution pipes, depending on the configuration: valve shape (straight, angle) and connection direction (from the floor, from the wall).

Radiant panel systems

  • Improved flow rates calculations for the serial-connected panels.

RELEASE Rev. 9.2

  • There were no significant functional changes in this release.

RELEASE Rev. 9.1

  • There were no significant functional changes in this release.

RELEASE Rev. 9.0

Modules:

InstalSystem basis and Package Manager

  • Added declare multi-wing doors and windows.
  • Added the appearance configuration of the Reference point.
  • AUTO mode has been extended of snap the vertices Opening in slab to elements from the DWG underlay.

Radiant loop systems

  • Improved algorithm of insert Heating floor in multi-storey rooms (with Opening in slab).
  • Implemented automatic algorithm which cuts Heating wall lying in the area of windows / doors.

Heat loss (thermal load)

  • Added the possibility of defining Tolerance relative to thickness of graphical partition (wall, ceilings and roofs), that the Partition definitions will be assign.

Radiant panel systems

  • Improved determination of the optimal refrigerating level (Δθ) for the serial-connected panels.
  • Maximum height position for the panels has been increased to 30 m.
  • Expanded information of the flow rate for panel hint and panel label.

RELEASE Rev. 8.0

Modules:

InstalSystem basis and Package Manager

  • Improved diagnostics for incomplete data when Generate walls and slabs from rooms and building contour algorithm has launched.
  • Room label - added the ability of display the Description field.
  • Added the possibilty of creating default room types (with their data and parameters).
  • Added configure the appearance of elements during their insertion operations.
  • Improved the ergonomy of filling graphic elements data.

Heat loss (thermal load)

  • Changed diagnostics from error to warning for Partition definitions with no thickness filled for Part. with specified U (Heat transfer coefficient).

RELEASE Rev. 7.3

  • There were no significant functional changes in this release.

RELEASE Rev. 7.2

Modules:

InstalSystem basis and Package Manager

  • New diagnostic messages for incorrect or incomplete building structure data have been introduced.
  • The rank of the message with zero thickness of the partition definition has been reduced to a warning or hint (when the definition has no default status).

Radiant panel systems

  • "Zone of ceiling panels" tool has been improved and developed.

Articles in HelpSystem:

RELEASE Rev. 6.1

Modules:

InstalSystem basis and Package Manager

  • Added A0 and A1 formats to printout pages.
  • Improved AUTO and ORTO modes.

Radiator sizing

  • Added possibility to display in radiator’s label setting of valves insert.
  • Allowed defining in project options default distance of radiator from wall.
  • Improved graphical presentation of radiators mounting items (so-called consoles) on plan views.

Radiant loop systems

  • Added possibility to choose criterion of supply temperature optimization in radiant systems with correction of the algorithm's operation.
  • Improved algorithm of automatic division Heating/Cooling Zones into Heating/Cooling Areas.
  • Improved algorithm of automatic drawings of radiant heating/cooling loops.

Articles in HelpSystem:

RELEASE Rev. 5.1

  • There were no significant functional changes in this release.

RELEASE Rev. 5.0

Modules:

InstalSystem basis and Package Manager

  • Added dimension lines.

Radiant loop systems

  • Improved the algorithm of automatic division of heating/cooling floor zone.
  • Improved presentation of RHC loop drawing on 3D view.
  • Extended functionality of pipe feed route to automatically fill the entire width of the stip with pipe feeds.

Articles in HelpSystem:

RELEASE Rev. 4.0

Modules:

Radiant loop systems

  • Improved the algorithm drawing the RHC loop.

Radiant panel systems

  • Added ceiling panels zone - tool for automatic stacking of ceiling panels.

Articles in HelpSystem:

RELEASE Rev. 2.2

Modules:

InstalSystem basis and Package Manager

  • Added possibility to saved files read-only.
  • 3D view printout has been avaliable.

Articles in HelpSystem:

RELEASE Rev. 2.1

  • There were no significant functional changes in this release..

RELEASE Rev. 2.0

Initial scope of modules:

  • InstalSystem basis and Package Manager
  • Heat loss (thermal load)
  • Radiator sizing
  • Radiant loop systems
  • Radiant panel systems
  • Radiant loop dry systems
  • Heating systems
  • Radiant cooling systems
  • Interface gbXML (BIM)

Initial state of information materials

Retrieved from "https://en.test.help.instalsoft.com/index.php?title=Release_notes_InstalSystem_5&oldid=13391"