Release notes InstalSystem 5: Difference between revisions

Latest revision as of 15:25, 8 April 2021

Product	InstalSystem 5
Type of article	PRODUCT INFORMATION
Source for translation	2021-04-08

RELEASE Rev. 21.0 (planned date of publication 19.05.2021)*

* The scheduled date of publication may change. It is presented for information purposes only. InstalSoft is not obliged to release the publication on this date

RELEASE Rev. 20.2

Update of product catalogues.

RELEASE Rev. 20.1

Update of product catalogues.

RELEASE Rev. 20.0

IFC (BIM) import basis

A new module that allows to import a building model (including installations and equipment) from IFC files (watch video)
- Import of IFC files as an independent model (available on Underlay scope)
- Loading the IFC model into any project (new and with the existing, e.g. building structure or installation), including removing and replacing the existing model (re-import)
- Loading many independent models into one project
- Possibility of precise model management, incl. preview of the full structure of the IFC file, preview of the properties of each element, hiding and searching for elements using the Project browser window
- Loading of IFC models containing both architecture and designed installations previously exported from InstalSystem 5 and from other programs
- Model visible as in the 2D editor window (drawing as edges) as in the 3D view window (actual model)
- Snap-in of construction elements and installations drawn on a 2D view to IFC objects
- IFC models export to DXF / DWG (2D), PDF (2D / 3D) formats

IFC (BIM) building data interpretation

A new module that allows the interpretation of structural objects from the IFC file into InstalSystem 5 structural partitions (further used, among others, for thermal calculations of the building) (watch video)
- Independent interpretation of selected stories based on the IFC file to obtain worksheets
- Interpretation of selected construction elements (ifcBeam, ifcBuildingElementProxy, ifcColumn, ifcCurtainWall, ifcDoor, ifcFooting, ifcOpeningElement, ifcRoof, ifcSlab, ifcWall, ifcWindow and others) to InstalSystem 5 construction elements (Wall (with the element Opening in wall), Window, Door, Roof, Slab (with the element Opening in slab)) and used, among others, by the Heat loss module
- Possibility to modify or remove interpreted elements of the building structure

IFC (BIM) heating/cooling system export / IFC (BIM) tap water system export

New modules enabling the export to an IFC4 file of heating and water installations designed in InstalSystem 5 (as Reference View) (watch video)
- More information: https://standards.buildingsmart.org/MVD/RELEASE/IFC4/ADD2_TC1/RV1_2/HTML/schema/views/reference-view/index.htm
- The installation export function is available on the scope Printout
- Compliance of the classification of elements with the IFC4 standard: https://standards.buildingsmart.org/MVD/RELEASE/IFC4/ADD2_TC1/RV1_2/HTML/
- Controlling the export of labels assigned to items in the window -> Other settings -> Export labels to IFC file (the default is this option is unchecked)
- Compatibility of coordinates of the exported IFC file from InstalSystem 5 program with the loaded IFC model within the IFC (BIM) import basis module

Base module

New graphic elements: Polygon, Polyline, Rectangle, Ellipse
A throbber (Spinning wheel) for Check connections function
New function Move underlay enabling precise shifting of the underlay (by the indicated vector)
New marker (a dot) that distinguishes active Window (watch video)
Abort calculations button (watch video)
Improvement of program performance by:
- Speed up of work on big underlays in DWG/DXF format
- Speed up of graphics operations
- Speed up of ZOOM/PAN/ROTATE operations in the 3D view window
- Speed up of the Pipe-run elements insertion
- Speed up of data refresh operations in a General data window
Ability to control automatically created building units: Common to entire building / Separate for storeys
Possibility to create building units from the window 2D editor by selecting rooms and entering a common name for them in the field Building unit
Sorting the list of rooms in the window Project browser by the symbol of the room (the function is available under the right mouse button on the Building unit )
New function Terrain modelling enabling modeling and graphical visualization of ground surfaces of various shapes (in the form of a building envelope as a curve at the contact of the ground with external walls) (watch video)
Improvements of the Dormer by:
- improvement of automatically generated dormers on the Construction scope
- correct generation of the internal wall if the element Dormer covers two or more rooms
Rearrangement and improvement of the assignment of elements to layers after exporting a drawing to DWG / DXF formats
Update of product catalogues.

Heating systems/ Cooling systems

New element: Low-loss header' with size selected from the catalogue or automatically sized depending of flow rate (watch video)
New element: Expansion vessel with size selected manually from the catalogue (watch video)
New graphic elements (not calculated): Pressure gauge and Thermometer, straight and angular, possible to insert into the pipe-runs on the plan or in the 3D model (watch video)
A default Non-return valve can be set in General data window
Possibility to present the values of Obtained heating output and Obtained cooling output in Room label. Other values re-arranged and renamed.
Corrected and completed content of tables Manifold table and Radiant heating general results, in cases when a Radiator is supplied from the same manifold as Radiant heating.
New options in the Orientation field in Data table for Mixer / Pump unit /Control loop (watch video)
Possibility to change the position of the front of the Terminal unit element, which affects the result of the Generate schematic view function (watch video)
New presentation for the segments of pipe-runs coming out of the Manifold on the Automatic schematic view of installation sheet - graphical offset of the supply and return pipe-runs.
3D visualisation of: Manifold, Mixer / Pump unit , Hydraulic control loop elements orientation, during data declaration in Data table window (watch video)
Possibility to exclude selected rooms or receivers from the cooling function in heating/cooling installations (watch video)

Radiators sizing

Integrated universal (with right or left side connection) radiators - possibility to choose an universal radiators both as a Default left side conn. radiator type as well as as Default right side conn. radiator type
Change of diagnostics message: terminal unit connection system from other catalogue than connection pipes priority from Warning to Error, allowing for a faster response to the incompatible choice of system for Default radiator connection system (right/left/middle conn.) in relation to the choice of Default pipe types and insulation for Branch/TU connection pipe in General data window (watch video)

Heat loss

Constant, independent of the calculation options, visibility of values in the project data: c_wirk for the building and C_wirk/A for a Partition definition
Calculations according to ÖNORM EN 12831; H 7500-1 standard have all result tables according to this standard
The ability to select a preset for f_h in Data table window of Room, which are higher than 5m.
Optimization of the Thermal calculations of building algorithm, what may reduce time of the calculations
Improvements to the Dormer by:
- correct determination of the room cubic capacity if the element Dormer covers two or more rooms
- improvement of the determination of thermal partitions in the H&E(T) scope for various design situations including dormers
Improvement of the algorithm that automatically creates thermal partitions from structural elements
Automatic division of thermal partitions into or taking into account the course of the ground curve (new element )

Tap water systems

New element: Expansion vessel with size selected manually from the catalogue (watch video)
New graphic elements (not calculated): Pressure gauge> and Thermometer, straight and angular, possible to insert into the pipe-runs on the plan or in the 3D model (watch video)
Improvement of algorithm generating automatically schematic views
Change of diagnostics message: terminal unit connection system from other catalogue than connection pipes priority from Warning to Error, allowing for a faster response to the incompatible choice of system for System of connections for other water outlet points in relation to the choice of Default pipe types and insulation for Branch/TU connection pipe in General data window (watch video)

RELEASE Rev. 19.6

Base module

Update of product catalogues.

RELEASE Rev. 19.5

Base module

Update of product catalogues.

RELEASE Rev. 19.4

Base module

Update of product catalogues.

RELEASE Rev. 19.3

Base module

Update of product catalogues.

RELEASE Rev. 19.2

Base module

Correction of critical errors which blocked the Generate schematic view function.
Update of product catalogues.

RELEASE Rev. 19.1

Base module

Possibility to update InstalSystem 5 without requiring the administrator rights.
Update of product catalogues.

RELEASE Rev. 19.0

Base module

Improvements in the program performance:
- Faster response to group selection of the elements
- Smoother work with 3D view window
- Acceleration of : Automatic walls, slabs and roofs and Correction of wall geometry functions
If a high-performance graphics card (not integrated with the motherboard or with the processor) is detected in the hardware configuration, it is set as active for the InstalSystem 5 program. This eliminates problems with the stability and performance of the application resulting from the lower performance of the integrated graphics card
PDF files exported by the program now have a vector structure, which allowed to significantly reduce their size
The front side of some elements is marked when selecting the element in the plan view - helps to obtain correct Automatic schematic view of installation
Automatic generation of flat roofs (watch the video)
Support for creating a building structure and designing installations in buildings with multiple series of storeys (with mutually shifted floor levels) by: (watch the video)
- Possibility to display the Building contour element on another series of storeys (new field ). This allows for the correct generation of structural partitions (walls and ceilings) after calling the Automatic walls, slabs and roofs function
- Possibility of dividing the Slab element and quick convertion into the Roof
- Possibility to combine parts of the installation on different series of storeys using the Riser element (with the option and the option to hide the Riser element in the printout)
- Printout on one sheet two storeys, using the Additional storey field available for the Printout pages element
Opening in wall element has been given a new option of connecting rooms by Merge rooms checkbox, available in Data table window (watch the video)
Extended descriptions of the functions on the ribbon for the Construction edit scope (watch the video)
Presentation of product catalog codes at the stage of editing general data and data of elements (watch the video)
Standard logo of the manufacturer distributing the given corporate version of the InstalSystem 5 package presented in tabular printouts can be replaced with the user's logo, e.g. of a design office (watch the video)
Automatic schematic view of installation: rearrangement of the sections and fields in Data table for Starting point

Heating systems / Cooling systems

New elements: single manifold, pipe-run No-flow, Safety valve
The Terminal unit element has been given a new option to define a default distance from the floor, separately for each storey
Elements: Mixer / Pump unit and Hydraulic control loop
- Possibility to choose the level of detail in presentation of these elements separately on individual views: 2D, 3D and schematic view (watch the video)
- Possibility to define the dimensions of these elements on Automatic schematic view of installation sheet regardless of the dimentions on 2D/3D views (watch the video)
- New fields: Default width of mixers / control/mixing units and Default height of mixers / control/mixing units in Data table for Starting point allows to define default dimensions of these elements on a particular Automatic schematic view of installation sheet

Heat loss

Calculations of the heat load of the building in accordance with ÖNORM EN 12831 + H-7500-1
Optimization of the Thermal calculations of building algorithm, what may reduce time of the calculations

Radiant systems

Two-parameter manifolds, integrating the high- and low- temperature part and the mixing unit (watch the video)
New template of manifold chart, dedicated to industrial systems
New checkbox Hide systems from catalogues different than the manifold
Acceleration of the supply temperature optimization algorythm, what may reduce time of the calculations

Tap water extensions

Three-way mixing valves, reducing the temperature of hot water (watch the video)

RELEASE Rev. 18.5

Update of product catalogues.

RELEASE Rev. 18.4

Cooling systems

Method of determining the specific heat of the medium filling the installation has been improved.

RELEASE Rev. 18.3

Update of product catalogues.

RELEASE Rev. 18.2

Update of product catalogues.

RELEASE Rev. 18.0

Base module

Change of the program architecture to 64-bit. That means there is a possibility to use all of the computer's RAM available. Previous publications, which were in 32-bit architecture, could only use 4GB of RAM.
Improvements in the program performance:
- faster response to switching between two types of elements Worksheet
- faster loading of 3D view content
- faster opening of files containing DWG/DXF underlay
- reduced time of Computation of building structure
- reduced time of Thermal calculations of building
Improvements of the algorithm which creates Automatic schematic view of installation
New diagnostic messages related to the function Automatic schematic view of installation.
The contested elements are indicated in the graphic editor.
New graphic presentation of the Endpoint for schematic view.
Symbols of the element Starting point are generated automatically after using the function Generate for Automatic schematic view of installation.
Selection of item Fragment of installation on Sheet type: Schematic view references to item Endpoint on Sheet type: Plan view.
New hints on Status Bar informing about active keys during insertion of the elements.
Improved AUTO mode and ORTO mode for drawing of building structure.
Possibility to edit Roof element on 3D view.
Possibility to define roof slope with automatic calculation of elevation of ordinates for Roof.
Dormers are included in calculations of Net volume.
Change in organization of Ribbon in Construction section:
- Buttons are sorted in order of recommended path of use for building structure designing
- Button Automatic walls, slabs and roofs moved to the Construction section.
New diagnostic related to wall connections after using Automatic walls, slabs and roofs function, informing about detected irregularities.
New Component styles 2D and 3D on Construction scope supporting the design and verification of the building structure.
New tool Correction of wall geometry enables automatic correction of building structure by using functions:
- Correct wall connections
- Correct wall thickness, enables getting the same walls thickness in entire project.
- Correct angles of the walls, enables the correction of parallelism / perpendicularity of walls relative to each other
- Correct position between storeys, enables the correction of the position and displacement of walls between storeys with the possibility of indicating a reference storey.
Tool is available on Ribbon in Construction section.
New, precise diagnostic messages for Computation of building structure , facilitate correct edition of the building structure.
Improvement of diagnostic message: Overlapping walls or incorrectly connected walls - messages are grouped and there is more precise indication of walls affecting incorrect Computation of building structure
Possibility of more accurate location of the Reference point element because of more accurate impact of AUTO mode for snapping to DWG underlays elements (also axis)
New Multi-storey room marker in label.

Heating systems

Added Automatic labels for Pipe-runs in Starting point (thermal installations) data.

Heat loss

The user interface was changed in the scope of specific data of rooms and building units, unifying it with other program modules. Special editors have been left for cooling partitions in rooms and for partition definitions.
Improvements in Thermal calculations of building based on a properly defined building structure..

Tap water systems

The possibility of calculations according to the EN 806-3 standard.
Automatic schematic view of installation - new functionality available - BETA version

RELEASE Rev. 17.5

Update of product catalogues.

RELEASE Rev. 17.4

Update of product catalogues.

RELEASE Rev. 17.3

Update of product catalogues.

Articles in HelpSystem:

Automatically generate schematic views

RELEASE Rev. 17.2

Update of product catalogues.

Articles in HelpSystem:

Designing sanitary system loop installations
How to make the program run faster (actualized)
Introduction to the work with the package InstalSystem 5 (actualized)
List of standards and methods used for sizing and calculations (actualized)
Package technical specifications (actualized)
Problems with the application on computers with integrated graphics card (actualized)

RELEASE Rev. 17.1

Update of product catalogues.

RELEASE Rev. 17.0

Base module

When inserting an opening in a sloping roof plane, the "z" coordinates of corner points are determined automatically
In the Storeys management window, the values Storey elevation and Storey height are editable, and the complement each other for adjacent stories
For the top floor, Elevation of roof top property has been added, the change of which corrects the height of that floor
The option of distinguishing the style and label of a "manual" room (drawn directly) from "automatic" (generated automatically based on the arrangement of walls and slabs) has been introduced.
When drawing elements "roof edge", Opening in roof, Dormer in AUTO mode, snapping to DWG base elements is carried out
In the calculations of the building structure, Overlapping walls or incorrectly connected walls diagnostics was introduced. The contested elements are indicated in the graphical editor
In the Settings tab, sub-tab: Screen appearance, checkbox Disable advanced presentation of transparency on 3D' has been added. Checking can make it easier to work on computers with weaker graphics cards.
The 'Position tab has been added to the configuration of element label styles, where you can specify the default position of the label relative to the parent.

Heating systems

Automatic schematic view of installation - new functionality available - BETA version
The Boiler element was introduced as one of the possible properties of the element Source in the field Graphical presentation
Enabled declaration of dimensions of Terminal unit element from 1 cm.

Radiant systems

Ergonomy of corrections of pipe loops and pipe feeds drawings generated automatically and drawn manually has been improved.
New criterion of pipe feeds arrangement -AUTO- has been added to Pipe feeds route tool.

Panel systems

In the general data and in the data table of the element Ceiling panels zone the possibility of declaration of automatic placement of adjacent rows of panels in the zone with mutual offset has been introduced.

Tap water systems

For sanitary appliances, it is possible to declare the frame.
A declaration of default manifold types has been introduced in the general data.

Articles in HelpSystem:

RELEASE Rev. 16.2

Update of product catalogues.

Articles in HelpSystem:

RELEASE Rev. 16.1

Update of product catalogues.

Articles in HelpSystem:

General recommendations for users of InstalSystem 4 starting work with InstalSystem 5

RELEASE Rev. 16.0

Base module

Many elements of the installation (radiator, valve, pump, etc.) by default are inserted with label.
Possibility of precise control of pipe-runs arrangement, with different ordinates of the beginning and end of the pipe-run (case of pipe-runs carried out in inclined ceilings / walls).

Heating systems

Possibility to declare (General data window, Storeys management tab) the default distance from the floor separately of the supply and return pipe-runs.

Tap water systems

Possibility to declare (General data window, Storeys management tab) the default distance from the floor separately of the hot water, cold water and circulation pipe-runs.
Rearrangement of general data tabs.
New element of the installation - linear drain.

Flat stations

New module enabling the design of heating and water supply installations with the use of flat stations.

Articles in HelpSystem:

Calculation of design heat load of rooms (actualized)
Manifold and accessories (actualized)
Pipe feeds route and editing pipe feeds in a radiant system (actualized)
Pipe feeds route - Good practices and use cases (actualized)

RELEASE Rev. 15.3

Update of product catalogues.

RELEASE Rev. 15.2

Update of product catalogues.

RELEASE Rev. 15.1

Base module

List of elements displayed in window Project browser ia automatically adapted to currently edited edit scope.
Catalogues window - tabs have been replaced by more precise catalogue filters
Window 3D view - possibility to display edges of the elements (available under the button Show edges/Hide edges in section View)
The ability to generate rooms, whose whole area is located in another room

Heating systems/ Cooling systems

Settings from tab have been moved to tabs: Distribution system-Types and default data and Radiators-Radiators/Radiator valves - types and default data (tab has been removed).

Heat loss

Enabling module Thermal calculations of building automatically switches common project setting: Method of calculating Φ into variant Calculated acc. to coefficient
Enabled correction of room internal temperature (θ_i,H) of standard room types.

Radiant systems

Manifold can be placed on a drawing in horizontal position or with upward outlet ports (configuration via new field in data table Orientation).
In the tab Additional options in General data window Specific market options has been added - possibility to choose the method of the calculation without a surplus to flow rate for compensation of heat flow to the other side of the Heating-cooling surface

Panel systems

Data table window of element Wall panel/Ceiling panel - Δpmax field has been added thus enabling control of maximum pressure drop in single panel or set of panels in serial connection.

Tap water systems

Water supply installations designing module - availability depending on package

Articles in HelpSystem:

RELEASE Rev. 14.2

The amount and content of neutral product databases available in different language versions has been unified, what will facilitate the transfer of projects between versions.

RELEASE Rev. 14.1

There were no significant functional changes in this release.

Articles in HelpSystem:

Installation with underfloor and wall radiant heating system in single family building (actualized)

RELEASE Rev. 14.0

Modules:

Base module

A new access to PDF creation of text printouts. If the appropriate driver is installed in the system, the program uses it and provides the Print to PDF button directly in the print module's toolbar.
Possibility to declare the angle (rotation) of fittings (valve, filter etc.) relative to the pipeline axis (Window: Data table, field: Rotation angle).
New (separate) style and label for the Building contour element.
New field Distance from floor (set in storey data) in the data table of the element Pipe-run. Facilitates the control of the elevation of the network and allows correct copying of the repetitive installation to other floors.
Attractive graphic styles of certain elements in 3D view, including elements of the building structure.

Radiant systems

Graph of optimization presenting the quality of supply temperature (θ_{s,H rad}) in consideration of heating requirements of zones. Available in window General data on the tab: Sources, after first calculations.
New templates for Manifold table
New field Structural panel in window General data on the tab: Floor systems allows declaration of default system plate.

Heat loss

Improvement of the algorithm recognizing the area of the wall above the windows in a wall adjacent to ground, located entirely below the ground.

Articles in HelpSystem:

Introduction to the work with the package InstalSystem 5 (actualized)

RELEASE Rev. 13.3

Modules:

Base module

Improvements of algorithm responsible for shaping the roof slopes

RELEASE Rev. 13.2

There were no significant functional changes in this release.

RELEASE Rev. 13.1

Modules:

Base module

Rearrangement of icons in Construction

Radiant systems

Reconstruction and improvements of Interactive radiant systems calculations

RELEASE Rev. 13.0

Modules:

Base module

Headers of result tables can be locked and visible while scrolling tables.

Heat loss

Possibility to assign thermal partition definition (with defined U value) to construction partition of the same type, irrespective to its thickness.

Radiant systems

Pipe-feeds for underfloor heating/cooling system can be laid in insulation layer (below heating/cooling pipes in the screed)
Possibility to change orientation (vertically or horizontally) of the Mixer / Pump unit .
New label for element Mixer / Pump unit .
Mixer / control unit chart
Improvements of algorithm which determines supply temperature for radiant systems.
Improvements of algorithm which divides element Heating/Cooling Zone into Heating-cooling surface.
Diagnostics of laminar flow.

Heating systems and Cooling systems

More connection variants for element Terminal unit.

Articles in HelpSystem:

Problems with the application on computers with integrated graphics card

RELEASE Rev. 12.2

Modules:

Base module Package manager

Improvement of Autosave function

Implemented cooling system module - availability depending on package

RELEASE Rev. 12.1

Update of product catalogues.

RELEASE Rev. 12.0

Modules:

Base module i Package manager

Improvement of AUTO mode.
Diagnostics of available graphics cards.

Radiators sizing

Display of radiator output for manually selected sizes through the Data table.

Improvement of readability of Manifold table.
Improvement of algorithm determining drop of temperature on the set of serially connected panels.

RELEASE Rev. 11.0

Modules:

Base module i Package manager'

Improved function Automatic walls, slabs and roofs.
Improved zoom scale and the preview scale.
Improved diagnostics concerning errors in the building structure.
Supplemented information presented in the result tables.
Integration of Paper format element with Printout pages element.

Radiant systems

Improved algorithm of heat output calculations of Heated by pipe feeds floor type connected virtually.
Improved algorithm which automatically inserts a heating/cooling floors into rooms with a hole in the slab.

Heating systems

Improved automatic connections of integrated radiators to distrubution pipes, depending on the configuration: valve shape (straight, angle) and connection direction (from the floor, from the wall).

Panel systems

Improved flow rates calculations for the serial-connected panels.

RELEASE Rev. 9.2

Update of product catalogues.

RELEASE Rev. 9.1

Update of product catalogues.

RELEASE Rev. 9.0

Modules:

Base module i Package manager

Added declare multi-wing doors and windows.
Added the appearance configuration of the Reference point.
AUTO mode has been extended of snap the vertices Opening in slab to elements from the DWG underlay.

Improved algorithm of insert Heating floor in multi-storey rooms (with Opening in slab).
Implemented automatic algorithm which cuts Heating wall lying in the area of windows / doors.

Added the possibility of defining Tolerance relative to thickness of graphical partition (wall, ceilings and roofs), that the Partition definitions will be assign.

Improved determination of the optimal refrigerating level (Δθ) for the serial-connected panels.
Maximum height position for the panels has been increased to 30 m.
Expanded information of the flow rate for panel hint and panel label.

RELEASE Rev. 8.0

Modules:

Base module i Package manager

Improved diagnostics for incomplete data when Generate walls and slabs from rooms and building contour algorithm has launched.
Room label - added the ability of display the Description field.
Added the possibilty of creating default room types (with their data and parameters).
Added configure the appearance of elements during their insertion operations.
Improved the ergonomy of filling graphic elements data.

Changed diagnostics from error to warning for Partition definitions with no thickness filled for Part. with specified U (Heat transfer coefficient).

RELEASE Rev. 7.3

Update of product catalogues.

RELEASE Rev. 7.2

Modules:

Base module i Package manager

New diagnostic messages for incorrect or incomplete building structure data have been introduced.
The rank of the message with zero thickness of the partition definition has been reduced to a warning or hint (when the definition has no default status).

"Zone of ceiling panels" tool has been improved and developed.

Articles in HelpSystem:

How to eliminate: "Unbalanced circuit of terminal unit "XY"..."

RELEASE Rev. 6.1

Modules:

Base module i Package manager

Added A0 and A1 formats to printout pages.
Improved AUTO and ORTO modes.

Radiators sizing

Added possibility to display in radiator’s label setting of valves insert.
Allowed defining in project options default distance of radiator from wall.
Improved graphical presentation of radiators mounting items (so-called consoles) on plan views.

Added possibility to choose criterion of supply temperature optimization in radiant systems with correction of the algorithm's operation.
Improved algorithm of automatic division Heating/Cooling Zones into Heating/Cooling Areas.
Improved algorithm of automatic drawings of radiant heating/cooling loops.

Articles in HelpSystem:

How to include the drawing loop lenght in the calculations?
Preparation of building structure (actualized)
Appending drawings with radiant system loops (actualized)
Inserting plates in dry floor heating system

RELEASE Rev. 5.1

Update of product catalogues.

RELEASE Rev. 5.0

Modules:

Base module i Package manager

Added dimension lines.

Improved the algorithm of automatic division of heating/cooling floor zone.
Improved presentation of RHC loop drawing on 3D view.
Extended functionality of pipe feed route to automatically fill the entire width of the stip with pipe feeds.

Articles in HelpSystem:

RELEASE Rev. 4.0

Modules:

Improved the algorithm drawing the RHC loop.

Added ceiling panels zone - tool for automatic stacking of ceiling panels.

Articles in HelpSystem:

Import of building model from BIM compatible formats
Import underlay files (actualized)
Radiant steel ceiling panels (actualized)
Preparation of building structure - Creation of roofs with different construction
Preparation of building structure (actualized)

RELEASE Rev. 2.2

Modules:

Base module i Package manager

Added possibility to saved files read-only.
3D view printout has been avaliable.

Articles in HelpSystem:

RELEASE Rev. 2.1

Update of product catalogues.

RELEASE Rev. 2.0

Initial scope of modules:

Base module i Package manager
Radiators sizing
Interface gbXML (BIM)

Initial state of information materials

InstalSystem 5

@@ Line 10: / Line 10: @@
 |c3                 =<!--if there is the second category, change to->"category3="-->
 |category_name3     =<!--fill up with category "SOFTWARE APPLICATION"/"FUNCTIONALITY"/...-->
-|version1           =[[Release notes InstalSystem 5#Version GOLD Rev. 11.0|GOLD Rev. 15.2]]
+|version1           =2021-04-08
 |v2                 =<!--Jest wersja -> zamienić na: "version2=" i uzupełnić link do sekcji RN danego produktu-->
 |v3                 =<!--Jest wersja -> zamienić na: "version2=" i uzupełnić link do sekcji RN danego produktu-->
@@ Line 16: / Line 16: @@
 }}
-==Information about==
+<!--In the absence of changes, standard text is published: "Update of product catalogues."-->
-<!--In the absence of changes, standard text is published: "There were no significant functional changes in this release."-->
+<!--===<span style="color: grey;">''RELEASE Rev. XX.Y (planned date of publication DD.MM.YYYY*)''</span>===-->
-<!--===<span style="color: grey;">''RELEASE Rev. XX.Y (planned)''</span>===-->
+<!--<span style="color: grey;">* The scheduled date of publication may change. It is presented for information purposes only. InstalSoft is not obliged to release the publication on this date''</span>-->
+===<span style="color: grey;">''RELEASE Rev. 21.0 (planned date of publication 19.05.2021*)''</span>===
+<span style="color: grey;">* The scheduled date of publication may change. It is presented for information purposes only. InstalSoft is not obliged to release the publication on this date''</span><br clear="all"/>
+===RELEASE Rev. 20.2===
+* Update of product catalogues.
+===RELEASE Rev. 20.1===
+* Update of product catalogues.
+===RELEASE Rev. 20.0===
+{{#ev:youtube|QAOdHlV_S3s|300|left|}}<br clear="all"/>
+'''IFC (BIM) import basis'''
+* A new module that allows to import a building model (including installations and equipment) from IFC files (watch video)
+** Import of IFC files as an independent model (available on ''<IS_TS id=lystrGraphicBackground/>'' scope)
+** Loading the IFC model into any project (new and with the existing, e.g. building structure or installation), including removing and replacing the existing model (re-import)
+** Loading many independent models into one project
+** Possibility of precise model management, incl. preview of the full structure of the IFC file, preview of the properties of each element, hiding and searching for elements using the '' <IS_TS id = ProjectBrowser /> '' window
+** Loading of IFC models containing both architecture and designed installations previously  exported from InstalSystem 5 and from other programs
+** Model visible as in the '' <IS_TS id = GraphicalEdit /> '' window (drawing as edges) as in the  '' <IS_TS id = View3D /> '' window (actual model)
+** Snap-in  of construction elements and installations drawn on a 2D view to IFC objects
+** IFC models export to DXF / DWG (2D), PDF (2D / 3D) formats
+'''IFC (BIM) building data interpretation'''
+* A new module that allows the interpretation of structural objects from the IFC file into InstalSystem 5 structural partitions (further used, among others, for thermal calculations of the building) (watch video)
+** Independent interpretation of selected stories based on the IFC file to obtain worksheets
+** Interpretation of selected construction elements (ifcBeam, ifcBuildingElementProxy, ifcColumn, ifcCurtainWall, ifcDoor, ifcFooting, ifcOpeningElement, ifcRoof, ifcSlab, ifcWall, ifcWindow and others) to InstalSystem 5 construction elements (''<IS_TS id=iNameKonstrSciana/>'' (with the element ''<IS_TS id = pinNameOtworWScianie />''), ''<IS_TS id = pinNameOkno />'', ''<IS_TS id = pinNameDrzwi />'', ''<IS_TS id = Roof />'', ''<IS_TS id = Slab />'' (with the element ''<IS_TS id = rpOtworWstropie />'')) and used, among others, by the ''<IS_TS id = PH_IS5_HL/>'' module
+** Possibility to modify or remove interpreted elements of the building structure<br/>
+'''IFC (BIM) heating/cooling system export''' / '''IFC (BIM) tap water system export'''
+* New modules enabling the export to an IFC4 file of heating and water installations designed in InstalSystem 5 (as Reference View) (watch video)
+** More information: https://standards.buildingsmart.org/MVD/RELEASE/IFC4/ADD2_TC1/RV1_2/HTML/schema/views/reference-view/index.htm
+** The installation export function is available on the scope '' <IS_TS id = lystrPrintPreview /> ''
+** Compliance of the classification of elements with the IFC4 standard: https://standards.buildingsmart.org/MVD/RELEASE/IFC4/ADD2_TC1/RV1_2/HTML/
+** Controlling the export of labels assigned to items in the window '' <IS_TS id = strBtnUstawieniaCaption /> '' -> '' <IS_TS id = OtherSettings /> '' -> '' <IS_TS id = strChbIfcExportLabels /> '' (the default is this option is unchecked)
+** Compatibility of coordinates of the exported IFC file from InstalSystem 5 program with the loaded IFC model within the ''<IS_TS id=rpPodkladyIFC/>'' module
+'''<IS_TS id=PH_ISNS5_BASE/>'''
+* New graphic elements: ''<IS_TS id=iNamePolygon/>'', ''<IS_TS id=iNamePolyline/>'', ''<IS_TS id=iNameRectangle/>'', <IS_TS id=iNameEllipse/>''
+* A throbber  (Spinning wheel) for  ''<IS_TS id=btCheckFlow/>'' function
+* New function '' <IS_TS id = rpMoveUnderlay /> '' enabling precise shifting of the underlay (by the indicated vector)
+* New marker (a dot) that distinguishes active ''<IS_TS id=rsWindow/>'' (watch video)
+* Abort calculations button (watch video)
+* Improvement of program performance by:
+** Speed up of work on big underlays in DWG/DXF format
+** Speed up of graphics operations
+** Speed up of ZOOM/PAN/ROTATE operations in the ''<IS_TS id=View3D/>'' window
+** Speed up of the ''<IS_TS id=iNameDzialka/>'' elements insertion
+** Speed up of data refresh operations in a ''<IS_TS id=rsDanogi/>'' window
+* Ability to control automatically created building units: '' <IS_TS id=strCreateJBOnEachStoreyFalse/>'' / ''<IS_TS id = strCreateJBOnEachStoreyTrue/> ''
+* Possibility to create building units from the window '' <IS_TS id=GraphicalEdit/> '' by selecting rooms and entering a common name for them in the field '' <IS_TS id = iNameJednostkaBudynku/> ''
+* Sorting the list of rooms in the window '' <IS_TS id=ProjectBrowser/> '' by the symbol of the room (the function is available under the right mouse button on the '' <IS_TS id=iNameJednostkaBudynku/> '')
+* New function '' <IS_TS id=rpCreateGround/> '' enabling modeling and graphical visualization of ground surfaces of various shapes (in the form of a building envelope as a curve at the contact of the ground with external walls) (watch video)
+* Improvements of the '' <IS_TS id=Lukarna/> '' by:
+** improvement of automatically generated dormers on the  '' <IS_TS id = lystrFloors />'' scope
+** correct generation of the internal wall if the element '' <IS_TS id=Lukarna/> '' covers two or more rooms
+* Rearrangement and improvement of the assignment of elements to layers after exporting a drawing to DWG / DXF formats
+* Update of product catalogues.
+'''<IS_TS id=PH_IS5_H/>'''/ '''<IS_TS id=PH_IS5_C/>'''
+* New element: ''<IS_TS id=iNameCOSprzegloHydr/>' with size selected from the catalogue or automatically sized depending of flow rate  (watch video)
+* New element: ''<IS_TS id=iNameNaczWzb/>'' with size selected manually from the catalogue  (watch video)
+* New graphic elements (not calculated): ''<IS_TS id=pinNameManometr/>'' and ''<IS_TS id=pinNameTermometr/>'', straight and angular, possible to insert into the pipe-runs on the plan or in the 3D model (watch video)
+* A default ''<IS_TS id=pinNameZaworZwrotny/>'' can be set in ''<IS_TS id=rsDanogi/>'' window
+* Possibility to present the values of ''<IS_TS id=UzyskanaMocOgrzewania/>'' and ''<IS_TS id=UzyskanaMocChlodzenia/>'' in ''<IS_TS id=rsPomieszczenie/>'' label. Other values re-arranged and renamed.
+* Corrected and completed content of tables ''<IS_TS id=iNameTabelkaRozdzielacza/>'' and ''<IS_TS id=OPGeneralResultsHeatingTitle/>'', in cases when a ''<IS_TS id=iNameCOGrzejnik/>'' is supplied  from the same manifold as ''<IS_TS id=strOgrzewaniePlaszczyznoweLong/>''.
+*  New options in the ''<IS_TS id=strpnOrientation/>'' field in ''<IS_TS id=DataEditorTable/>'' for ''<IS_TS id=iNameCOReduktorTemp/>''/''<IS_TS id=rpWezel/>'' (watch video)
+*  Possibility to change the position of the front of the ''<IS_TS id=iNameCOElementONarzOporze/>'' element, which affects the result of the ''<IS_TS id=GenerateSchematicCaption/>'' function (watch video)
+* New presentation for the segments of pipe-runs coming out of the ''<IS_TS id=iNameRozdzielaczPure/>'' on the ''<IS_TS id=iNameHyperlinkRozw/>'' sheet - graphical offset of the supply and return pipe-runs.
+* 3D visualisation of: ''<IS_TS id=iNameRozdzielaczPure/>'', ''<IS_TS id=iNameCOReduktorTemp/>'', ''<IS_TS id=iNameCOWezelRegulacyjny/>'' elements orientation, during data declaration in ''<IS_TS id=DataEditorTable/>'' window (watch video)
+* Possibility to exclude selected rooms or receivers from the cooling function in heating/cooling installations (watch video)
+'''<IS_TS id=PH_IS5_DOG/>'''
+* Integrated universal (with right or left side connection) radiators - possibility to choose an universal radiators both as a ''<IS_TS id=DomyslnyTypGrzejZasLewo/>'' as well as as ''<IS_TS id=DomyslnyTypGrzejZasPrawo/>''
+* Change of diagnostics message: ''<IS_TS id=strerrOdbiornikNiekompatybilnySystemPodl/>'' priority from  ''<IS_TS id=rsDlgCptWarning/>'' to ''<IS_TS id=cErrorString/>'', allowing for a faster response to the incompatible choice of system for ''<IS_TS id=DomslnySysPodGrzejZasPrawejLewejSrodka/>'' in relation to the choice of ''<IS_TS id=strDomyslnyTypRurIIzolacji/>'' for ''<IS_TS id=UmiejscowieniePodejscieGalazka/> '' in <IS_TS id=rsDanogi/>'' window (watch video)
+'''<IS_TS id=PH_IS5_HL/>'''
+* Constant, independent of the calculation options, visibility of values in the project data: ''<IS_TS id=strs_expidISFOZCDaneOgolneEN_PojemnoscCieplna/>'' for the building and ''<IS_TS id=strs_expidISFKonstrukcjaPrzegrodyEN_PojCieplnaNaMetrDo2PrzegWewSrednia/>'' for a  ''<IS_TS id=sISFKonstrukcjaPrzegrody/>''
+* Calculations according to ''<IS_TS id=rsSC_EN_12831_ONORM/>'' standard have all result tables according to this standard
+* The ability to select a preset for ''<IS_TS id=strs_expidISFPomieszczenieEN_WysokosciowaKorektaQStrat/>'' in  ''<IS_TS id=DataEditorTable/>'' window of ''<IS_TS id=rsPomieszczenie/>'', which are higher than 5m.
+* Optimization of the ''<IS_TS id = ObliczeniaCieplneBudynku/>'' algorithm, what may reduce time of the calculations
+* Improvements to the ''<IS_TS id = Lukarna/>''  by:
+** correct determination of the room cubic capacity if the element '' <IS_TS id = Lukarna/> '' covers two or more rooms
+** improvement of the determination of thermal partitions in the '' <IS_TS id = ScopeOZC_T_Short /> '' scope for various design situations including dormers
+* Improvement of the algorithm that automatically creates thermal partitions from structural elements
+* Automatic division of thermal partitions into '' <IS_TS id = rsTypKon structurePartitionScianaZewnetrzna /> '' or '' <IS_TS id = rsTypKon KonstrukcjiPrzegrodyScianaPrzyGruncie /> '' taking into account the course of the ground curve (new element '' <IS_TS id = rpCreate /> '')
+'''<IS_TS id=PH_IS5_T/>'''
+* New element: ''<IS_TS id=iNameNaczWzb/>'' with size selected manually from the catalogue  (watch video)
+* New graphic elements (not calculated): ''<IS_TS id=pinNameManometr/>>'' and ''<IS_TS id=pinNameTermometr/>'', straight and angular, possible to insert into the pipe-runs on the plan or in the 3D model  (watch video)
+* Improvement of algorithm generating automatically schematic views
+* Change of diagnostics message: ''<IS_TS id=strerrOdbiornikNiekompatybilnySystemPodl/>'' priority from  ''<IS_TS id=rsDlgCptWarning/>'' to ''<IS_TS id=cErrorString/>'', allowing for a faster response to the incompatible choice of system for ''<IS_TS id=systemPodlaczenPunktowCzerpalnych/>'' in relation to the choice of ''<IS_TS id=strDomyslnyTypRurIIzolacji/>'' for ''<IS_TS id=UmiejscowieniePodejscieGalazka/> '' in ''<IS_TS id=rsDanogi/>'' window (watch video)
+===RELEASE Rev. 19.6===
+'''<IS_TS id=PH_ISNS5_BASE/>'''
+* Update of product catalogues.
+===RELEASE Rev. 19.5===
+'''<IS_TS id=PH_ISNS5_BASE/>'''
+* Update of product catalogues.
+===RELEASE Rev. 19.4===
+'''<IS_TS id=PH_ISNS5_BASE/>'''
+* Update of product catalogues.
+===RELEASE Rev. 19.3===
+'''<IS_TS id=PH_ISNS5_BASE/>'''
+* Update of product catalogues.
+===RELEASE Rev. 19.2===
+'''<IS_TS id=PH_ISNS5_BASE/>'''
+* Correction of critical errors which blocked the ''<IS_TS id=GenerateSchematicCaption/>'' function.
+* Update of product catalogues.
+===RELEASE Rev. 19.1===
+'''<IS_TS id=PH_ISNS5_BASE/>'''
+* Possibility to update InstalSystem 5 without requiring the administrator rights.
+* Update of product catalogues.
+===RELEASE Rev. 19.0===
+{{#ev:youtube|cTZu1tKyk40 |300|left|}}<br clear="all"/>
+'''<IS_TS id=PH_ISNS5_BASE/>'''
+* Improvements in the program performance:<br clear="all"/>- Faster response to group selection of the elements <br clear="all"/>- Smoother work with ''<IS_TS id = View3D /> '' window <br clear="all"/>- Acceleration of : ''<IS_TS id = PartitionsGenerator/>'' and ''<IS_TS id = CorrectWallGeometry/>'' functions  <br clear="all"/>
+* If a high-performance graphics card (not integrated with the motherboard or with the processor) is detected in the hardware configuration, it is set as active for the InstalSystem 5 program. This eliminates problems with the stability and performance of the application resulting from the lower performance of the integrated graphics card
+* PDF files exported by the program now have a vector structure, which allowed to significantly reduce their size
+* The front side of some elements is marked when selecting the element in the plan view - helps to obtain correct ''<IS_TS id = iNameHyperlinkRozw />''
+* Automatic generation of flat roofs (watch the video)
+* Support for creating a building structure and designing installations in buildings with multiple series of storeys (with mutually shifted floor levels) by: (watch the video)<br clear="all"/>- Possibility to display the ''<IS_TS id=ObrysBud/>'' element on another series of storeys (new field ''<IS_TS id=PokazujNaInnychCiagach/>''). This allows for the correct generation of structural partitions (walls and ceilings) after calling the ''<IS_TS id=PartitionsGenerator/>'' function<br clear="all"/>- Possibility of dividing the ''<IS_TS id=Slab/>'' element and quick convertion into the ''<IS_TS id=Roof/>''<br clear="all"/>- Possibility to combine parts of the installation on different series of storeys using the ''<IS_TS id=iNamePion/>'' element (with the ''<IS_TS id=PokazujNaInnychCiagach/>'' option and the option to hide the ''<IS_TS id=iNamePion/>'' element in the printout)<br clear="all"/>- Printout on one sheet two storeys, using the ''<IS_TS id=PrintoutPages_AdditionalStoreyCaption/>'' field available for the ''<IS_TS id=PrintoutPages_ElementName/>'' element
+* ''<IS_TS id=pinNameOtworWScianie/>'' element has been given a new option of connecting rooms by ''<IS_TS id=OpeningConnectsRooms/>'' checkbox, available in ''<IS_TS id=DataEditorTable/>'' window (watch the video)
+* Extended descriptions of the functions on the ribbon for the ''<IS_TS id=lystrFloors/>'' edit scope (watch the video)
+* Presentation of product catalog codes at the stage of editing general data and data of elements (watch the video)
+* Standard logo of the manufacturer distributing the given corporate version of the InstalSystem 5 package presented in tabular printouts can be replaced with the user's logo, e.g. of a design office (watch the video)
+* ''<IS_TS id=iNameHyperlinkRozw />'': rearrangement of the sections and fields in '' <IS_TS id = DataEditorTable /> '' for '' <IS_TS id = SchematicStartPointNameSingle /> ''
+'''<IS_TS id=PH_IS5_H/>''' / '''<IS_TS id=PH_IS5_C/>'''
+* New elements: single manifold, pipe-run ''<IS_TS id=iNameCODzialkaOdpowietrzenie/>'', ''<IS_TS id=pinNameZaworBezp/>''
+* The ''<IS_TS id=iNameCOElementONarzOporze/>'' element has been given a new option to define a default distance from the floor, separately for each storey
+* Elements: '' <IS_TS id = iNameCOReduktorTemp /> '' and '' <IS_TS id = iNameCOWezelRegulacyjny /> ''<br clear="all"/> - Possibility to choose the level of detail in presentation of these elements  separately on individual views: 2D, 3D and schematic view (watch the video)<br clear="all"/> - Possibility to define the dimensions of these elements on ''<IS_TS id=iNameHyperlinkRozw />'' sheet regardless of the dimentions on 2D/3D views (watch the video)<br clear="all"/> - New fields: ''<IS_TS id = MixerDefWidthOnSchematic />'' and ''<IS_TS id = MixerDefHeightOnSchematic />'' in ''<IS_TS id = DataEditorTable />'' for  ''<IS_TS id=SchematicStartPointNameSingle/>'' allows to define default dimensions of these elements on a particular ''<IS_TS id = iNameHyperlinkRozw />'' sheet
+'''<IS_TS id=PH_IS5_HL/>'''
+* Calculations of the heat load of the building in accordance with ÖNORM EN 12831 + H-7500-1
+* Optimization of the ''<IS_TS id = ObliczeniaCieplneBudynku/>'' algorithm, what may reduce time of the calculations
+'''<IS_TS id=PH_IS5_RL/>'''
+* Two-parameter manifolds, integrating the high- and low- temperature part and the mixing unit (watch the video)
+* New template of manifold chart, dedicated to industrial systems
+* New checkbox ''<IS_TS id=strChbNiePokazujSystemowAutomatykiZKataloguInnegoNizRozdzielacz/>''
+* Acceleration of the supply temperature optimization  algorythm, what may reduce time of the calculations
+'''<IS_TS id=PH_IS5_TEX/>'''
+* Three-way mixing valves, reducing the temperature of hot water (watch the video)
+===RELEASE Rev. 18.5===
+* Update of product catalogues.
+===RELEASE Rev. 18.4===
+'''<IS_TS id=PH_IS5_C/>'''
+* Method of determining the specific heat of the medium filling the installation has been improved.
+===RELEASE Rev. 18.3===
+* Update of product catalogues.
+===RELEASE Rev. 18.2===
+* Update of product catalogues.
+===RELEASE Rev. 18.0===
+{{#ev:youtube|g8k_wwlshzw  |300|left|}}<br clear="all"/>
+'''<IS_TS id=PH_ISNS5_BASE/>'''
+* Change of the program architecture to 64-bit. That means there is a possibility to use all of the computer's RAM available. Previous publications, which were in 32-bit architecture, could only use 4GB of RAM.
+* Improvements in the program performance:<br clear="all"/> - faster response to switching between two types of elements ''<IS_TS id=strArkuszRoboczy/> ''<br clear="all"/> - faster loading of ''<IS_TS id=View3D/>'' content <br clear="all"/> - faster opening of files containing ''<IS_TS id=iNameDWGBackground/>''<br clear="all"/> - reduced time of ''<IS_TS id=BuildingStructureCalculation/>''<br clear="all"/> - reduced time of ''<IS_TS id=ObliczeniaCieplneBudynku/>''
+* Improvements of the algorithm which creates ''<IS_TS id=iNameHyperlinkRozw/>''
+* New diagnostic messages related to the function ''<IS_TS id=iNameHyperlinkRozw/>''.<br clear="all"/> The contested elements are indicated in the graphic editor.
+* New graphic presentation of the ''<IS_TS id=SchematicEndPointNameSingle/>'' for schematic view.
+* Symbols of the element ''<IS_TS id=SchematicStartPointNameSingle/>'' are generated automatically after using the function ''<IS_TS id=GenerateStoreysButton/>'' for ''<IS_TS id=iNameHyperlinkRozw/>''.
+* Selection of item ''<IS_TS id=FragmentSubstitutionOnSchematic/>'' on ''<IS_TS id=ArkuszTypuRozwiniecie/>'' references to item ''<IS_TS id=SchematicEndPointNameSingle/>'' on ''<IS_TS id=ArkuszTypuPlanRzut/>''.
+* New hints on Status Bar informing about active keys during insertion of the elements.
+* Improved ''<IS_TS id=strAUTOModeName/>'' mode and ''<IS_TS id=strORTOModeName/>'' mode for drawing of building structure.
+* Possibility to edit ''<IS_TS id=Roof/>'' element on ''<IS_TS id=View3D/>''.
+* Possibility to define roof slope with automatic calculation of elevation of ordinates for ''<IS_TS id=Roof/>''.
+* Dormers are included in calculations of ''<IS_TS id=strl_expidISFPomieszczenieKubatura/>''.
+* Change in organization of Ribbon in ''<IS_TS id=lystrFloors/>'' section:<br clear="all"/> - Buttons are sorted in order of recommended path of use for building structure designing <br clear="all"/> - Button  ''<IS_TS id=PartitionsGenerator/>'' moved to the ''<IS_TS id=lystrFloors/>'' section.
+* New diagnostic related to wall connections after using  ''<IS_TS id=PartitionsGenerator/>'' function,  informing about detected irregularities.
+* New ''<IS_TS id=strLblWygladCaption/>'' 2D and 3D on ''<IS_TS id=lystrFloors/>'' scope supporting the design and verification of the building structure.
+* New tool ''<IS_TS id=CorrectWallGeometry/>'' enables automatic correction of building structure by using functions:<br clear="all"/> - ''<IS_TS id=CorrectWallConnections/>''<br clear="all"/>- ''<IS_TS id=CorrectWallThickness/>'', enables getting the same walls thickness in entire project.<br clear="all"/>- ''<IS_TS id=CorrectWallAngles/>'',  enables the correction of parallelism / perpendicularity of walls relative to each other <br clear="all"/>- ''<IS_TS id=CorrectWallShifts/>'', enables the correction of the position and displacement of walls between storeys with the possibility of indicating a reference storey.<br clear="all"/> Tool is available on Ribbon in ''<IS_TS id=lystrFloors/>'' section.
+* New, precise diagnostic messages for ''<IS_TS id=BuildingStructureCalculation/>'', facilitate correct edition of the building structure.
+* Improvement of diagnostic message: ''<IS_TS id=ScianyNakladajaSieAlboBledniePolaczone/>'' -  messages are grouped and there is more precise indication of walls affecting incorrect ''<IS_TS id=BuildingStructureCalculation/>'' <br clear="all"/>
+* Possibility of more accurate location of the ''<IS_TS id=iNameReferencePoint/>'' element because of more accurate impact of  ''<IS_TS id=strAUTOModeName/>'' mode for snapping to DWG underlays elements (also axis)
+* New ''<IS_TS id=iNameZnacznikPomWielokondygnacyjnego/>'' in ''<IS_TS id=strl_stridISFPomieszczenieIsMultiStorey/>'' label.
+'''<IS_TS id=PH_IS5_H/>'''
+* Added ''<IS_TS id=CreateLabelsAutomaticallyCaption/>'' for ''<IS_TS id=DzialkaPrzylacze/>'' in ''<IS_TS id=rpCreateSchematicStartPointT/>'' data.
+'''<IS_TS id=PH_IS5_HL/>'''
+* The user interface was changed in the scope of specific data of rooms and building units, unifying it with other program modules. Special editors have been left for cooling partitions in rooms and for partition definitions.
+* Improvements in ''<IS_TS id=ObliczeniaCieplneBudynku/>'' based on a properly defined building structure..
+'''<IS_TS id=PH_IS5_T/>'''
+*  The possibility of calculations according to the EN 806-3 standard.
+* '''<IS_TS id=iNameHyperlinkRozw/>''' -  new functionality available  -  BETA version
-===<span style="color: grey;">''RELEASE Rev. 15.2 (planned)''</span>===
+===RELEASE Rev. 17.5===
-* There were no significant functional changes in this release.
+* Update of product catalogues.
+===RELEASE Rev. 17.4===
+* Update of product catalogues.
+===RELEASE Rev. 17.3===
+* Update of product catalogues.
+====Articles in HelpSystem:====
+* [[Automatically generate schematic views]]
+===RELEASE Rev. 17.2===
+* Update of product catalogues.
+====Articles in HelpSystem:====
+* [[Designing sanitary system loop installations]]
+* [[How to make the program run faster]] (actualized)
+* [[Introduction to the work with the package InstalSystem 5]] (actualized)
+* [[List of standards and methods used for sizing and calculations]] (actualized)
+* [[Package technical specifications]] (actualized)
+* [[Problems with the application on computers with integrated graphics card]] (actualized)
+===RELEASE Rev. 17.1===
+* Update of product catalogues.
+===RELEASE Rev. 17.0===
+{{#ev:youtube|4xiQAQT08mE |300|left|}}<br clear="all"/>
+'''<IS_TS id=PH_ISNS5_BASE/>'''
+* When inserting an opening in a sloping roof plane, the "z" coordinates  of corner points are determined automatically
+* In the ''<IS_TS id=StoreyManagement/>'' window, the values ''<IS_TS id=strLblRzednaKondCaption/>'' and ''<IS_TS id=strLblWysokoscKondygnacjiCaption/>'' are editable, and the complement each other for adjacent stories
+* For the top floor, ''<IS_TS id=RzednaSzczytuDachuCaption/>'' property has been added, the change of which corrects the height of that floor
+* The option of distinguishing the style and label of a "manual" room (drawn directly) from "automatic" (generated automatically based on the arrangement of walls and slabs) has been introduced.
+* When drawing elements "roof edge", ''<IS_TS id=rpOtworWdachu/>'', ''<IS_TS id=Lukarna/>'' in AUTO mode, snapping to DWG base elements is carried out
+* In the calculations of the building structure, ''<IS_TS id=ScianyNakladajaSieAlboBledniePolaczone/>'' diagnostics was introduced. The contested elements are indicated in the graphical editor
+* In the ''<IS_TS id=btUstawienia/>'' tab, sub-tab: ''<IS_TS id=btUstawieniaWygladEkranu/>'', checkbox ''<IS_TS id=disableAdvancedTransparency/>' has been added. Checking can make it easier to work on computers with weaker graphics cards.
+* The '''<IS_TS id=pcstrXY/>'' tab has been added to the configuration of element label styles, where you can specify the default position of the label relative to the parent.
+'''<IS_TS id=PH_IS5_H/>'''
+* ''<IS_TS id=iNameHyperlinkRozw/>'' - new functionality available - BETA version
+* The ''<IS_TS id=iNameCOKociol/>'' element was introduced as one of the possible properties of the element ''<IS_TS id=iNameCOZrodlo/>'' in the field ''<IS_TS id=strpnZrodloWyglad/>''
+* Enabled declaration of dimensions of ''<IS_TS id=iNameCOElementONarzOporze/>'' element from 1 cm.
+'''<IS_TS id=PH_IS5_RL/>'''
+* Ergonomy of corrections of pipe loops and pipe feeds drawings generated automatically and drawn manually has been improved.
+* New criterion of pipe feeds arrangement -AUTO- has been added to ''<IS_TS id=rpStrefaPrzylaczy/>'' tool.
+'''<IS_TS id=PH_IS5_RP/>'''
+* In the general data and in the data table of the element ''<IS_TS id=strefaPaneliSufitowych/>'' the possibility of declaration of automatic placement of adjacent rows of panels in the zone with mutual offset has been introduced.
+'''<IS_TS id=PH_IS5_T/>'''
+* For sanitary appliances, it is possible to declare the frame.
+* A declaration of default manifold types has been introduced in the general data.
+====Articles in HelpSystem:====
+* [[Heat source dimensioning for installations with flat stations]]
+* [[Installation with convective heating and water supply system with use of flat stations in a multifunctional building]]
+* [[Terminal unit]]
+===RELEASE Rev. 16.2===
+* Update of product catalogues.
+====Articles in HelpSystem:====
+* [[Designing of water supply system installation]]
+* [[Heating/cooling zone build-up editor]] (actualized)
+* [[How to eliminate: "Cannot apply any pipe spacing"]]
+===RELEASE Rev. 16.1===
+* Update of product catalogues.
+====Articles in HelpSystem:====
+* [[General recommendations for users of InstalSystem 4 starting work with InstalSystem 5]]
+===RELEASE Rev. 16.0===
+{{#ev:youtube|9zFFUsSOQHc|300|left|}}<br clear="all"/>
+'''<IS_TS id=PH_ISNS5_BASE/>'''
+* Many elements of the installation (radiator, valve, pump, etc.) by default are inserted with label.
+* Possibility of precise control of pipe-runs arrangement, with different ordinates of the beginning and end of the pipe-run (case of pipe-runs carried out in inclined ceilings / walls).
+'''<IS_TS id=PH_IS5_H/>'''
+* Possibility to declare (''<IS_TS id=rsDanogi/>'' window, ''<IS_TS id=StoreyManagement/>'' tab) the default distance from the floor separately of the supply and return pipe-runs.
+'''<IS_TS id=PH_IS5_T/>'''
+* Possibility to declare (''<IS_TS id=rsDanogi/>'' window, ''<IS_TS id=StoreyManagement/>'' tab) the default distance from the floor separately of the hot water, cold water and circulation pipe-runs.
+* Rearrangement of general data tabs.
+* New element of the installation - linear drain.
+'''<IS_TS id=PH_IS5_SM/>'''
+* New module enabling the design of heating and water supply installations with the use of flat stations.
+====Articles in HelpSystem:====
+* [[Calculation of design heat load of rooms]] (actualized)
+* [[Manifold and accessories]] (actualized)
+* [[Pipe feeds route and editing pipe feeds in a radiant system]] (actualized)
+* [[Pipe feeds route - Good practices and use cases]] (actualized)
+===RELEASE Rev. 15.3===
+* Update of product catalogues.
+===RELEASE Rev. 15.2===
+* Update of product catalogues.
 ===RELEASE Rev. 15.1===
@@ Line 106: / Line 373: @@
 ===RELEASE Rev. 12.2===
 ====Modules:====
-'''InstalSystem Base module and Package Manager'''
+'''''<IS_TS id=PH_ISNS5_BASE/>'' ''<IS_TS id=PH_5_PM/>'''''
 * Improvement of Autosave function
-'''Cooling systems'''
+'''''<IS_TS id=PH_5_C/>'''''
 *  Implemented cooling system module - availability depending on  package
 ===RELEASE Rev. 12.1===
-* There were no significant functional changes in this release.
+* Update of product catalogues.
 ===RELEASE Rev. 12.0===
 ====Modules:====
-'''InstalSystem Base module and Package Manager'''
+'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
 * Improvement of ''<IS_TS id=strAUTOModeName/>'' mode.
 * Diagnostics of available graphics cards.
-'''Radiator sizing'''
+'''''<IS_TS id=PH_IS5_DOG/>'''''
 * Display of radiator output for manually selected sizes through the ''<IS_TS id=DataEditorTable/>''.
-'''Radiant panel systems'''
+'''''<IS_TS id=PH_5_RP/>'''''
 * Improvement of readability of ''<IS_TS id=iNameTabelkaRozdzielacza/>''.
 * Improvement of algorithm determining drop of temperature on the set of serially connected panels.
@@ Line 129: / Line 396: @@
 ===RELEASE Rev. 11.0===
 ====Modules:====
-'''InstalSystem basis and Package Manager'''
+'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>''''
 * Improved function ''<IS_TS id=PartitionsGenerator/>''.
 * Improved zoom scale and the preview scale.
@@ Line 136: / Line 403: @@
 * Integration of ''<IS_TS id=PaperFormat/>'' element with ''<IS_TS id=PrintoutPages_ElementName/>'' element.
-'''Radiant loop systems'''
+'''''<IS_TS id=PH_IS5_RL/>'''''
 * Improved algorithm of heat output calculations of ''Heated by pipe feeds'' floor type connected virtually.
 * Improved algorithm which automatically inserts a heating/cooling floors into rooms with a hole in the slab.
-'''Heating systems'''
+'''''<IS_TS id=PH_IS5_H/>'''''
 * Improved automatic connections of integrated radiators to distrubution pipes, depending on the configuration: valve shape (straight, angle) and connection direction (from the floor, from the wall).
-'''Radiant panel systems'''
+'''<IS_TS id=PH_IS5_RP/>'''
 * Improved flow rates calculations for the serial-connected panels.
 ===RELEASE Rev. 9.2===
-* There were no significant functional changes in this release.
+* Update of product catalogues.
 ===RELEASE Rev. 9.1===
-* There were no significant functional changes in this release.
+* Update of product catalogues.
 ===RELEASE Rev. 9.0===
 ====Modules:====
-'''InstalSystem basis and Package Manager'''
+'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
 * Added declare multi-wing doors and windows.
 * Added the appearance configuration of the ''<IS_TS id=iNameReferencePoint/>''.
 * ''AUTO'' mode has been extended of snap the vertices ''<IS_TS id=rpOtworWstropie/>'' to elements from the DWG underlay.
-'''Radiant loop systems'''
+'''''<IS_TS id=PH_5_RL/>'''''
 * Improved algorithm of insert ''Heating floor'' in multi-storey rooms (with ''Opening in slab'').
 * Implemented automatic algorithm which cuts ''Heating wall'' lying in the area of windows / doors.
-'''Heat loss (thermal load)'''
+'''''<IS_TS id=PH_5_HL/>'''''
 * Added the possibility of defining ''Tolerance relative to thickness of graphical partition'' (wall, ceilings and roofs), that the ''Partition definitions'' will be assign.
-'''Radiant panel systems'''
+'''''<IS_TS id=PH_5_RP/>'''''
 * Improved determination of the optimal refrigerating level (Δθ) for the serial-connected panels.
 * Maximum height position for the panels has been increased to 30 m.
@@ Line 173: / Line 440: @@
 ===RELEASE Rev. 8.0===
 ====Modules:====
-'''InstalSystem basis and Package Manager'''
+'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
 * Improved diagnostics for incomplete data when ''Generate walls and slabs from rooms and building contour'' algorithm has launched.
 * Room label - added the ability of display the ''<IS_TS id=sOpis/>'' field.
@@ Line 180: / Line 447: @@
 * Improved the ergonomy of filling graphic elements data.
-'''Heat loss (thermal load)'''
+'''''<IS_TS id=PH_5_HL/>'''''
 * Changed diagnostics from error to warning for ''Partition definitions'' with no thickness filled for ''Part. with specified U (Heat transfer coefficient)''.
 ===RELEASE Rev. 7.3===
-* There were no significant functional changes in this release.
+* Update of product catalogues.
 ===RELEASE Rev. 7.2===
 ====Modules:====
-'''InstalSystem basis and Package Manager'''
+'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
 * New diagnostic messages for incorrect or incomplete building structure data have been introduced.
 * The rank of the message with zero thickness of the partition definition has been reduced to a warning or hint (when the definition has no default status).
-'''Radiant panel systems'''
+'''''<IS_TS id=PH_5_RP/>'''''
 * "Zone of ceiling panels" tool has been improved and developed.
@@ Line 200: / Line 467: @@
 ===RELEASE Rev. 6.1===
 ====Modules:====
-'''InstalSystem basis and Package Manager'''
+'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
 * Added A0 and A1 formats to printout pages.
 * Improved AUTO and ORTO modes.
-'''Radiator sizing'''
+'''''<IS_TS id=PH_IS5_DOG/>'''''
 * Added possibility to display in radiator’s label setting of valves insert.
 * Allowed defining in project options default distance of radiator from wall.
 * Improved graphical presentation of radiators mounting items (so-called consoles) on plan views.
-'''Radiant loop systems'''
+'''''<IS_TS id=PH_5_RL/>'''''
 * Added possibility to choose criterion of supply temperature optimization in radiant systems with correction of the algorithm's operation.
 * Improved algorithm of automatic division Heating/Cooling Zones into Heating/Cooling Areas.
@@ Line 221: / Line 488: @@
 ===RELEASE Rev. 5.1===
-* There were no significant functional changes in this release.
+* Update of product catalogues.
 ===RELEASE Rev. 5.0===
 ====Modules:====
-'''InstalSystem basis and Package Manager'''
+'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
 * Added dimension lines.
-'''Radiant loop systems'''
+'''''<IS_TS id=PH_5_RL/>'''''
 * Improved the algorithm of automatic division of heating/cooling floor zone.
 * Improved presentation of RHC loop drawing on 3D view.
@@ Line 245: / Line 512: @@
 ===RELEASE Rev. 4.0===
 ====Modules:====
-'''Radiant loop systems'''
+'''''<IS_TS id=PH_5_RL/>'''''
 * Improved the algorithm drawing the RHC loop.
-'''Radiant panel systems'''
+'''''<IS_TS id=PH_5_RP/>'''''
 * Added ceiling panels zone - tool for automatic stacking of ceiling panels.
@@ Line 260: / Line 527: @@
 ===RELEASE Rev. 2.2===
 ====Modules:====
-'''InstalSystem basis and Package Manager'''
+'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
 * Added possibility to saved files read-only.
 * 3D view printout has been avaliable.
@@ Line 271: / Line 538: @@
 ===RELEASE Rev. 2.1===
-* There were no significant functional changes in this release..
+* Update of product catalogues.
 ===RELEASE Rev. 2.0===
 ====Initial scope of modules:====
+* '''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
-* '''InstalSystem basis and Package Manager'''
+* '''''<IS_TS id=PH_5_HL/>'''''
-* '''Heat loss (thermal load)'''
+* '''''<IS_TS id=PH_IS5_DOG/>'''''
-* '''Radiator sizing'''
+* '''''<IS_TS id=PH_5_RL/>'''''
-* '''Radiant loop systems'''
+* '''''<IS_TS id=PH_5_RP/>'''''
-* '''Radiant panel systems'''
+* '''''<IS_TS id=PH_5_RLD/>'''''
-* '''Radiant loop dry systems'''
+* '''''<IS_TS id=PH_5_H/>'''''
-* '''Heating systems'''
+* '''''<IS_TS id=PH_5_C/>'''''
-* '''Radiant cooling systems'''
 * '''Interface gbXML (BIM)'''
@@ Line 292: / Line 558: @@
 <!--===Version BETA Rev. 2.0.B5===
 ====Modules:====
-'''Base module, including InstalSystem Manager'''
+'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>''''
 * Introduced term licences as additional licensing option (available for selected packages) with mechanisms supporting term and renewal control (''Change license'' tab),
 * Introduced demo version (available for selected packages).
@@ Line 304: / Line 570: @@
 ===Version BETA Rev. 2.0.B4===
 ====Modules:====
-'''Base module, including InstalSystem Manager'''
+'''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''
 * Put in order access to the most important diagnostic messages.
 * Diagnostics has been added to report errors during roof generating.
@@ Line 313: / Line 579: @@
 * Changed the name of the ''Upgrade'' button in Manager for ''Licence change'' button while preserving its original functionality.
-'''Heat loss (thermal load)'''
+'''''<IS_TS id=PH_5_HL/>'''''
 * The format ''Heat losses data'' moved from the ''H&E'' window to the ''General Data'' window.
-'''Radiant heating - loop systems'''
+'''''<IS_TS id=PH_5_RL/>'''''
 * Added the ability to define the default type of 3D valve in the mixer.
 * The default mixer size has been corrected.
@@ Line 322: / Line 588: @@
 ===Version BETA Rev. 2.0.B3===
 ====Modules:====
-'''Base module, including InstalSystem Manager'''
+'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
 * Edit tabs in graphical editor got two new states of visibility:
 ** ''Translucent when active''  - useful when analyzing the partition definitions and graphics partitions in 3D.
 ** ''The only one visible when inactive'' - automatically inactivates other ranges, regardless of their own settings.
-'''Heat loss (thermal load)'''
+'''''<IS_TS id=PH_5_HL/>'''''
 * Multi-storey rooms  are recognized (equivalent to ''interconnected rooms'' in version 4). A multi-storey room is automatically created in the absence of a slab between rooms on adjacent floors when the slab does not cover the whole projection of the room or when the slab has an active opening in slab.
 * It is possible to select partition definitions as ''default for this type and dimensions'' also in the project browser tree, using the pop-up menu.
@@ Line 338: / Line 604: @@
 ===Version BETA Rev. 2.0.B2===
 ====Modules:====
-'''Base module, including InstalSystem Manager'''
+'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
 * Fixed walls connecting generated automatically by the partitions generator.
 * Fixed connecting fragments of the underlay in .pdf format.
@@ Line 344: / Line 610: @@
 * Allowed quickly switching between worksheets in a graphical editor using the arrows next to the selection window of the worksheets.
-'''Radiant heating - loop systems'''
+'''''<IS_TS id=PH_5_RL/>'''''
 * Moved window of control circuit settings to Thermal systems sources in the General Data.
 * Allowed to replace virtual temperature sources with graphic elements by ugins a special button in the control circuit settings in the General Data.
@@ Line 350: / Line 616: @@
 ===Version BETA Rev. 2.0.B1===
 ====Modules:====
-'''Base module, including InstalSystem Manager'''
+'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
 * Introduced the ability to search elements in the Project browser based on a string of signs.
 * Allowed to insert dormers.
@@ Line 362: / Line 628: @@
 ===Version BETA 37 Rev. 0.0.B37===
 ====Modules:====
-'''Base module, including InstalSystem Manager'''
+'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
 * Improved efficiency of the program in handling with complex projects, time of files upload and regeneration of the 3D view.
-'''Radiator sizing'''
+'''''<IS_TS id=PH_5_DOG/>'''''
 * Added the ability to search of radiators and valves placed on the radiators in the search window of elements in the project.
-'''Heat loss (thermal load)'''
+'''''<IS_TS id=PH_5_HL/>'''''
 * Introduced heat loss (thermal load) module in accordance with standard EN 12831.
@@ Line 377: / Line 643: @@
 ===Version BETA 35 Rev. 0.0.B35===
 ====Modules:====
-'''Base module, including InstalSystem Manager'''
+'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
 * Raising the ergonomics of editing the roof by multiedit few vertices at the same time.
 * Merge and trim functions identify the premises in one operation.
@@ Line 396: / Line 662: @@
 ===Version BETA 34 Rev. 0.0.B34===
 ====Modules:====
-'''Base module, including InstalSystem Manager'''
+'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
 * Improved import files created in InstalSystem 4 for automatic deletion of elements that are not supported in InstalSystem 5.
 * Improved ''Wall'' connection.
 * Integrated a full range of Construction processing operations.
-'''Radiator sizing'''
+'''''<IS_TS id=PH_5_DOG/>'''''
 * Expanded radiator sizing in ''Addition for thermostat'' and ''Addition for casing/chanel''.
 * Expanded operations on the elements ''Radiators'' about the possibility of ''Flip horizontal''.
@@ Line 413: / Line 679: @@
 ===Version BETA 33 Rev. 0.0.B33===
 ====Modules:====
-'''Radiant heating - loop systems'''
+'''''<IS_TS id=PH_5_RL/>'''''
 * Improved the data propagation from ''Room'' elements created with walls to the ''Heating/Cooling Wall Zone'' elements.
-'''Radiator sizing'''
+'''''<IS_TS id=PH_5_DOG/>'''''
 * Improved the data propagation from ''Room'' elements created with walls to the ''Radiator'' elements.
 ===Version BETA 32 Rev. 0.0.B32===
 ====Modules:====
-'''Base module, including InstalSystem Manager'''
+'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
 * Introduced the ability of creating rooms due to other building structure's elements inserted in the project.
 * Introduced the ability of dividing roof into parts and added new functionality which allows to change ordinates of individual points at the roof's outline to model its real surface.
@@ Line 428: / Line 694: @@
 * Increased the ergonomy of label editor.
-'''Radiator sizing'''
+'''''<IS_TS id=PH_5_DOG/>'''''
 * Introduced radiator sizing in basic scope. This functionality will be completed and developed in the next beta versions.
@@ Line 436: / Line 702: @@
 ===Version BETA 31 Rev. 0.0.B31===
 ====Modules:====
-'''Base module, including InstalSystem Manager'''
+'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
 * Introduced a new conception for wall element and the functionality of connecting walls.
 * Indroduced new physical element - the slab.
@@ Line 442: / Line 708: @@
 * Expanded function "Shadow of a storey" for possibility to declare shadows displayed for all stories below.
-'''Radiant heating - panel systems'''
+'''''<IS_TS id=PH_5_RP/>'''''
 * Introduced possibility of calculating thermal output of ceiling/wall panels according to EN 1264 standard.
@@ Line 450: / Line 716: @@
 ===Version BETA 30 Rev. 0.0.B30===
 ====Modules:====
-'''Base module, including InstalSystem Manager'''
+'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
 * Allowed to control the content of diagnostic messages using the checkbox "Messages for selected components" on the list of filters in the diagnostics window.
 * Introduced the possibility to handle by the distribution system mail domains with the sign "-".
-'''Radiant heating - panel systems'''
+'''''<IS_TS id=PH_5_RP/>'''''
 * Taken into account results for panels in the radiant heating general results.
 * Introduced the presentation of panels connection points on 3D view.
@@ Line 465: / Line 731: @@
 ===Version BETA 29 Rev. 16.5.1===
 ====Modules:====
-'''Base module, including InstalSystem Manager'''
+'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
 * Allowed handling of mail domains containing sign "-" by the licence distribution system.
 * Improved stability of the program during pasting complex installations.
@@ Line 471: / Line 737: @@
 * For each element with snapping possibility added the ability to set in the AUTO mode a parameter which predetermine distance from the edge of another inserted element.
-'''Radiant heating - loop systems'''
+'''''<IS_TS id=PH_5_RL/>'''''
 * Corrected a bug related to the manual connecting RHC loop directly to the manifold (without pipe-runs).
-'''Radiant heating - panel systems'''
+'''''<IS_TS id=PH_5_RP/>'''''
 * Allowed the presentation of data in the printout of 'Manifold table' for panel systems installation.
-'''Radiant heating - dry systems'''
+'''''<IS_TS id=PH_5_RLD/>'''''
 * Introduced dry system to the neutral catalogue of radiant heating systems.
@@ Line 487: / Line 753: @@
 ===Version BETA 28 Rev. 16.4.1===
 ====Modules:====
-'''Base module, including InstalSystem Manager'''
+'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
 * Improved the automatic snapping of pipe-runs for the ORTO mode.
 * Improved the function of rooms interpretation for files imported from '''[[InstalSystem 4]]''' package.
 * Introduced the ability to insert into the project construction elements: ''Wall'', ''Window'', ''Door'', ''Opening in wall''.
-'''Radiant heating - panel systems'''
+'''''<IS_TS id=PH_5_RP/>'''''
 * Introduced the possibility to insert into the project element ''Ceiling false panel'' (panel with no connection).
 * Added the cooling result card for panel installation: ''General results cooling''.
@@ Line 499: / Line 765: @@
 ===Version BETA 27 Rev. 16.3.1===
 ====Modules:====
-'''Base module, including InstalSystem Manager'''
+'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
 * Improved function 'automatically connect terminal units'.
 * Made available the ability to configure the buttons to select a group of elements (SHIFT and CTRL).
@@ Line 506: / Line 772: @@
 * Added the function of the graphic presentation of routes flow from the source (manifold, source) to all receivers, which it supplies.
-'''Radiant heating - dry systems'''
+'''''<IS_TS id=PH_5_RP/>'''''
 * Introduced handling underfloor panels which lead the pipes in dry systems of radiant heating.
 ===Version BETA 26 Rev. 16.2.1===
 ====Modules:====
-'''Base module, including InstalSystem Manager'''
+'''',<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
 * Improved saving files in a network location.
 * Introduced the possibility to choose the source for which you want to appear the critical circuit.
@@ Line 517: / Line 783: @@
 ===Version BETA 25 Rev. 16.1.1===
 ====Modules:====
-'''Base module, including InstalSystem Manager'''
+'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
 * Added function that allows automatically connect terminal units.
 * Added possibility of quick creating rectangular room with sides parallel to the X, Y by drawing diagonal of the room.
 * The problem with sending Problem Report Form is eliminated.
-'''Radiant heating - panel systems'''
+'''''<IS_TS id=PH_5_RP/>'''''
 * Added function that allows connect panels in series.
 * Introduced the possibility to design heating/cooling installations using ceiling/wall panels (including radiant steel ceiling panels).<br/>''Attention! Required upgrade to the configuration with the new module (InstalSystem Manager - tab "Upgrade").
@@ Line 536: / Line 802: @@
 ====Modules:====
-'''Base module, including InstalSystem Manager'''
+'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
 * Improved stability and quality of the program.
-'''Radiant heating - loop systems'''
+'''''<IS_TS id=PH_5_RL/>'''''
 * Added a message about the lack of possibility for editing automatically generated pipe feeds/RHC loops.
 * Standarized the content of data table for heating/cooling zones at various ranges of editing.
@@ Line 551: / Line 817: @@
 ===Version BETA 23 Rev. 15.11.1===
 ====Modules:====
-'''Base module, including InstalSystem Manager'''
+'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
 * Fixed the problem with sending the Problem report form.
 * Added icons for the .isproj files displayed in the InstalSystem Manager and in the Windows Explorer's window.
 * The scope of the displayed catalogues in the general data has been adapted to the available project scope for the package.
-'''Radiant heating - loop systems'''
+'''''<IS_TS id=PH_5_RL/>'''''
 * Changed the designation of nodes in the grid which supports the manual drawing of the loop.
 * Added message box indicating the inability to remove the RHC loop.
-'''Heating network with balancing'''
+'''''<IS_TS id=PH_5_H/>'''''
 * Fixed the automatic sizing of manifolds' cabinets.
 * Improved the propagation of the default data for manifold cabinet.
@@ Line 572: / Line 838: @@
 ===Version BETA 22 Rev. 15.10.1===
 ====Modules:====
-'''Base module, including InstalSystem Manager'''
+'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
 * Added graphical rulers (horizontal and vertical) to help verify the scale of loaded underlay.
 * Improved ORTO and AUTO modes.
@@ Line 584: / Line 850: @@
 ===Version BETA 21 Rev. 15.9.2===
 ====Modules:====
-'''Base module, including InstalSystem Manager'''
+'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
 * Modified the way of importing base drawing files.
 * Added a ''Select components in rectangle'' function under the left mouse button.
@@ Line 590: / Line 856: @@
 * Accelerated loading of the newly created or saved again files, as a consequence the files created on previous versions may load slower.
-'''Radiant heating - loop systems'''
+'''''<IS_TS id=PH_5_RL/>'''''
 * Added the possibility of parallel connection of several RHC loop to one common outlet from the manifold.
 * Introduced balance diagnostics of the RHC loop connected to the manifold with not integrated balancing valves, and the possibility of adding on the pipe-runs valves which are balancing these objects.
-'''Heating network with balancing'''
+'''''<IS_TS id=PH_5_H/>'''''
 * Added the possibility to use multi-circuit heating floor zone.
 * Introduced balance diagnostics of the circuits by the heating floor zones in the systems without the manifold.
@@ Line 607: / Line 873: @@
 ===Version BETA 16.1 Rev. 15.5.17===
 ====Modules:====
-'''Base module, including InstalSystem Manager'''
+'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
 * Added new tool to search and select items in the project.
 * Improved the import and export of bases.
@@ Line 614: / Line 880: @@
 * Added the possibility to highlight on the worksheet elements forming the circuit of specified receptor from this worksheet.
-'''Radiant heating - loop systems'''
+'''''<IS_TS id=PH_5_RL/>'''''
 * Improved the functionality of pipe feed automatic generation.
@@ Line 622: / Line 888: @@
 ===Version BETA 15.1 Rev. 15.4.21===
 ====Initial scope of modules:====
-* '''Base module, including InstalSystem Manager'''
+* '''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
-* '''Radiant heating - loop systems'''
+* '''''<IS_TS id=PH_5_RL/>'''''
-* '''Cooling mode for radiant systems'''
+* '''''<IS_TS id=PH_5_C/>'''''
-* '''Heating network with balancing'''
+* '''''<IS_TS id=PH_5_H/>'''''
-* '''BIM Interface (gbXML)'''
+* '''''<IS_TS id=PH_5_gbXML/>'''''
 ====Initial state of articles in HelpSystem====
 * [[Technical specifications of InstalSystem 5 package]]
@@ Line 638: / Line 904: @@
 [[bg:Информация относно промени в InstalSystem 5]]
 [[zh-cn:InstalSystem 5 版本发布说明]]
+__NOTOC__